How to Fix PS4 Controller Not Connecting to DS4WindowsRecently my friends and I have been trying to use our DS4, or playstation 4 (PS4) controllers, with DS4

After you download the RemotePlayInstaller.exe, you can refer to the steps below to pair the computer to the controller (there is an expansion content in the FAQ). 1. Double-click the Bluetooth icon on the menu. 2. For Windows 8/8.1, skip this step.
Next, click the PS4 button in your controller to turn it on. You should start getting the “Controller connected” message periodically printed, as shown in figure 4, indicating a successful connect of the controller to the ESP32. Figure 4 – Output of the program after a PS4 controller is connected. References
Restart the modem and router. It's best to restart both the modem and wireless router. Then, see if the console can connect to the Wi-Fi network before assuming that the PS4 is the problem. Reboot the modem and router manually, wait about five minutes, then check to see if the PS4 can establish a connection.
Make sure Bluetooth is turned on, then press the Add device button in the settings menu. With your DualShock 4 controller powered off and disconnected, press and hold both the PS button and Share
Hi all, So when I try to connect my PS4 controller to my PC, nothing shows up. I've tried holding down the middle and share buttons, turning it on normally, resetting the controller, turning Bluetooth off and on again, charging the controller, restarting my PC, connecting via a USB cord, updating my drivers and my PC, taking the controller A "wireless controller" came up, I connected it. Still couldn't use it on any controller-supported games though. Went into big picture steam mode so I could add ps4 configuration support under "Controller" and "Controller Settings." Still didn't work. I disconnected and reconnected the controller a couple times, with and without the cord, no dice. Tapping the PS button on a DualSense while wired to a PS4 doesn't do anything, and the DualSense won't work with the console if you try to connect via Bluetooth pairing, either. There is one way 5. Search for the Bluetooth PS4 controller in the list. 6. Right-click on it and select Remove device. 7. Click Yes to confirm the action. 8. Wait a few moments, then re-connect the PS4 controller and enable the device. If your PS4 controller is not connecting to your PC, you should re-enable the Bluetooth device. Such a reset is likely to fix I0dNvo.
  • jeaapc89af.pages.dev/85
  • jeaapc89af.pages.dev/32
  • jeaapc89af.pages.dev/315
  • jeaapc89af.pages.dev/173
  • jeaapc89af.pages.dev/307
  • jeaapc89af.pages.dev/114
  • jeaapc89af.pages.dev/240
  • jeaapc89af.pages.dev/391

    • can t connect to ps4 controller